PRODUCT DETAILS

About Automotive Sector

In Flokser, we began to make our name in the international arena in a short period thanks to the projects for products, which we develop with OEM Main Industry and Sub-Industry firms in the Automotive sector and which we go into mass production subsequently. We have a great potential with our financial power, investment support and production capacity by contacting more number of projects everyday thanks to our experience and competency in this field. We have a very good partnership with our efficient R & D and design power that develop products according to specifications.

We produce approved products for Premium and Mid Segment Passenger Cars, Commercial Vehicles, Passenger Vehicles, Vessels and Railway Rolling Stocks, and international OEM firms. We are always in collaboration with approved Main Industry – T1 firms, with which we work on project basis. As a good automotive vinyl manufacturer, we develop and install approved products for each part, which is used for internal trim purposes in the automotive sector, from seat and headboard vinyl to sun shield vinyl, from vinyl for gear and handbrake to wheel cover vinyl, and from glove box panel vinyl to floor covering vinyl. Also, we provide spare parts and equivalent products to the aftermarket segment at all times.

About Contract Sector

In Flokser, we provide design and performance solutions to the Contract sector in almost any area of application. We maintain a powerful, dynamic and flexible structure to support various target markets by our products that are designed specially to meet the requirements of the sector. We provide rapid and effective solutions to our clients by our collections, which we make available in our stock pool at all time.

Designers, architects and interior space planning professionals from all over the world put their trust in our Contract technical leather products in order to materialize their concepts and sophisticated designs.

Thanks to the products, which we provide to the leading trademarks of the sector by unlimited colour and design options, we satisfy the expectations of our clients, by showing a high performance, in several mass use areas, such as hotel chains, medical institutions, schools, public institutions, banks, cinemas-theatres and entertainment centres, airports and stations, café-restaurant chains and entertainment centres etc.

Automotive Products

  1. Seating & Headrest; 2. Armrest Vinyl’s; 3. GapHider; 4. Bellows & Handbreak; 5. Instrumental Panel; 6. Side & Door Panel; 7. Headliners; 8. Heelmats; 9. Airbags; 10. Sunvisor; 11. Caravans; 12. Motorcycles; 13. Agricultural; 14. VIP-Design; 15. Public Transportation

Contract Products

  1. Outdoor & Marine; 2. Healthcare & Medicine; 3. Hospitality; 4. Office; 5. Residential; 6. Railways; 7. Public Spaces; 8. Military; 9. Private Jets; 10. Cruise; 11. Child-House; 12. State Buildings; 13. Body & Fitness

Stock Program

We produce moderate flame-retardant (BS 5852 Part2 Source5, NF P 92-501 M2, DIN 4102 Part 1 B2, UNI 9175 Class 1M etc.), high wear resistant, bleach resistant, antimicrobial and easily cleanable products, which are required intensely by the Contract Market.

We provide 41 colours and roll base service for our product, which is preferred by hospitals, hotels, government agencies, banks, cinemas-theatres and entertainment centres, cafes-restaurants, mass use areas such as businesses, and individual users, who attach importance to their personal safety and comfort, and we may provide service to the entire world from our joint warehouse.

TR STOCKON INC FR-5

We produce moderate flame-retardant (BS 5852 Part2 Source5, NF P 92-501 M2, DIN 4102 Part 1 B2, UNI 9175 Class 1M etc.), high wear resistant, bleach resistant, antimicrobial and easily cleanable products, which are required intensely by the Contract Market.

We provide roll base service for our product, which is preferred by hospitals, hotels, government agencies, banks, cinemas-theatres and entertainment centres, cafes-restaurants, mass use areas such as businesses, and individual users, who attach importance to their personal safety and comfort, and we may provide service to the entire world from our joint warehouse.

SIN SPRING FR

We produce recently regulated ECE-R-118. 02 certificated items, as well as moderate flame-retardant (BS 5852 Part0 & 1, EN1021, NFPA260, CAL-TB-116/117, IMO FTP Code Annex 1 Part 8. etc.), high wear resistant, bleach resistant, antimicrobial and easily cleanable products, which are required intensely by the Domestic group and External Space-Yacht Market.

We provide 18 colours and roll base service for our product, which is preferred for external spaces, marine vehicles, passenger vehicles and caravans, and for individual users, who attach importance to their personal safety and comfort, and we provide service to the entire world from our joint warehouse.

PLY NAUTOLEX FR

We produce moderate flame-retardant (BS 5852 Part0 & 1, EN1021, NFPA260, CAL-TB-116/117, IMO FTP Code Annex 1 Part 8. etc.), high wear resistant, bleach resistant, antimicrobial and easily cleanable products, which are required intensely by the Domestic group and External Space-Yacht Market.

We provide 10 colours and roll base service for our product, which is designed particularly for outdoors and marine vehicles and which meet expectations by showing high performance in relative fields, and we provide service to the entire world from our joint warehouse.

Automotive

We are adding value to life by maintaining a sustainable growth via developing environment-friendly products that may meet the requirements of ever-changing world, as well as quality standards by using new generation technical leather production techniques rather than traditional technical leather production methods.

By bio technical leather, which we produce by using polymers that are produced by using roots and leaves of plants, we completed our efforts of developing products for OEM clients, who are from premium segment. As a result of C-14 measurements and tests made in accredited laboratories, we approved our bio-content products, which conform to REACH up to the ratio of 42%. We are the leading firm in this sector thanks to our ever-renewed collections.

Contract

We are a firm, which assumes responsibility in terms of environment and human health. We hope that our business partners are aware of this responsibility as well. In this context, we produce technical leather products with long economical life, high frictional resistance and wear resistance, and that are antimicrobial, flameproof and stain-proof, that do not contain any DMF and halogen, that conform to REACH and that have a bio content. We are the leading firm in this sector thanks to our ever-renewed collections.

In Flokser, we believe in the high value of life and eco system, and we endeavour to protect the same.

1) STORAGE CONDITIONS

  • Products must be stored in areas that are not subject to any moisture and direct sunlight, and must be kept away from any source of heat.
  • Packaged balls must be maintained vertically. In case they have to be stored on top of each other, it is advised to not to overload and to not to keep them waiting for a long time.
  • In case products are carried by forklift or by other methods, care must be shown, and measures must be taken in order to preventitfrom being damaged due to shocks. The external package is only meant to prevent the product from getting dirty and dusty.
  • No interference must be made by sharp objects while taking products out of their packages.
  • First visual control must be made after thedelivery of the product and before taking products to the storage area. In case any non-conformity is determined relative customer representative must be contacted. Returned products that are delivered 30 days from return date are not accepted
  • Product labeling details are as follows. Pay attention to the colour code and other data available on the label. Tone differences may occur production process. Therefore, it is advised to use and sell the product according to lot sequence.

2) ISSUES THAT MUST BE CONSIDERED BEFORE AND AFTER USE

a) Before Use

  • Manufacturers/wholesalers must request information on the contents and specifications of products in order to make product design according to the characteristic structures of final products.
  • It may cause unwanted reactions when the product is used with different types of materials. (dyeing, vomiting, hardening, opdacity, giare, etc.) Before mass production, prototype should be done and tested.
  • Initial visual controls must be made before performing any operations with prod- ucts. Mass production must not be initiated before making studies on samples and before verifying whether final products’ satisfy test values. Returned prod- ucts, which are processed and cut, are not accepted.

  • Sewing must be performed by selecting suitable needle, thread and machinery in a way to not to deteriorate the physical structure of the product. Production must be initiated by making sample seams and after making seam and rupture controls.
  • Light and dark coloured products must not be used in combination against any risks that may occur in the future. Also, they must not be used with different iypes of materials, fastness value of which you are certain (fabric, denim and accessories etc.).
  • Tone differences may occur between lots due to process conditions. Same lots must be used together during usage. Separation of lot data available on labels is explained in the storage conditions section in detail
  • ln the case of productions made by using adhesive, it must be ensured that adhesive is not overused, and solvent is not used by being evaporated. Excessive amount of adhesive or solvent causes peeling, chipping and deformation on product surfaces.

b) After Use

  • Measures must be taken against damages that may occur during storage and handling of products.
  • Packaging procedures must be performed in a way to prevent products from being broken, causing tracks, adhering and being damaged. Various protective materials must be put between products, such as paper etc. Do not overload packages in order to prevent them from making pressure to each other. We hereby notify that products that have tracks due to such situations may not be corrected.
  • Packaged products must not be kept in boxes for a long time. Do not keep packages in hot and humid environments.
  • Users shall be liable for any defects that may occur due to process and person- al use during usage of the product.
  • Please ask from your supplier to provide you Technical Data Sheet (TDS) for the product in order to determine the washing instructions for the product and to share the same with end consumers. Washing instruction varies for every prod- uct.

3) CLEANING & CARE

  • Any stains, residuals or wetness that may occur on the surface of the product must be removed by a vacuum or absorbent rag immediately. Then, relative product must be wiped gentiy by a damp cloth or by water soluble chemicals (Ph-neutral,non-alcoholic and soft soap) immediately. Wiped surfaces must not be left wet and moist.
  • Washing instructions are determined individualIy for each product. Procedures must be performed according to washing instructions determined on labels. Washing and dry cleaning must not be performed as long as it is not determined on labels.
  • Wet and moist leather must be dried by being suspended and by natural methods without using any heat sources, such as hair driers, irons and heaters etc.
  • Various products may deteriorate the surface of products, such as concentrated cleaners, detergents, xylene based solvents, alcohol, cologne and acetone. Users shall be liable Tor any damages that may source from usage of such cleaners.
  • Products must be prevented from being in contact with various types of fabrics, accessories or materials for a long time as they are being used and stored. Impurities that are available on such type of materials may cause migra- tion. Set-in stains may occur as a result of any increase in moist and temperature levels in particular.
  • Keep your clothes, shoes, bags or accessories that are made of our products in breathing covers, in areas that are not subject to any heat and moisture, and that are ventilated properly, and without folding the same and in a way to not to cause any tracks.
  • Use/wear your products by protecting the same from various chemicals, such as hair sprays, perfumes and colognes etc.

Automotive

We are adding value to life by maintaining a sustainable growth via developing environment-friendly products that may meet the requirements of ever changing world, as well as quality standards by using new generation technical leather production techniques rather than traditional technical leather production methods.  

By bio technical leather, which we produce by using polymers that are produced by using roots and leaves of plants, we completed our efforts of developing products for OEM clients, who are from premium segment. As a result of C-14 measurements and tests made in accredited laboratories, we approved our bio-content products, which conform to REACH up to the ratio of 42%. We are the leading firm in this sector thanks to our ever-renewed collections.    

Contract

We are a firm, which assumes responsibility in terms of environment and human health. We hope that our business partners are aware of this responsibility as well. In this context, we produce technical leather products with long economical life, high frictional resistance and wear resistance, and that are antimicrobial, flameproof and stain-proof, that do not contain any DMF and halogen, that conform to REACH and that have a bio content. We are the leading firm in this sector thanks to our ever-renewed collections.    

In Flokser, we believe in the high value of life and eco system, and we endeavour to protect the same.

  • Do you have suitable stocks for Outdoor and Yacht use?

We can produce the required quantities of any color and pattern you want for outdoor and yacht use. Additionally, you can select from among our collections where you can buy in bulk for the outdoor and yacht use. Click here to make a selection.

  • I want to choose artificial leather for my car; do you have it in your stocks?

You can choose from premium and medium level automotive leather products in stock in our Etkin A.Ş. store.

Address: Ziya Gökalp Mah. Hürriyet Cad. Ikitelli Organize Bölgesi (Saraçlar Sanayi Sitesi 13.Blok No:21) Başakşehir/İstanbul

Tel: 0090 212 485 53 19

  • I need artificial leather products according to the specifications required for the project and tender; how can I get information on whether you have products that meet the relevant requirements?

You can request the product samples and certificates that meet the required conditions from the related technical personnel by forwarding the norms specified in the project specifications to info@flokser.com.tr.

  • What kind of vehicles do you supply artificial leather for the automotive sector?

We supply for all the passenger, public transport and commercial vehicle segments the products that meet the necessary qualifications and that are adequately accredited and open to sharing.

Contact Form

You can use the form below to request all questions, suggestions and suggestions.